Kina P18-L2 Bus Card validator USB bus rfid smart card reader factory a me nā mea hana |Manaʻo

P18-L2 Bus Card validator USB bus rfid akamai kāleka heluhelu

P18-L2 Bus Card validator USB bus rfid smart card reader Nā Kiʻi Hōʻikeʻike

ʻO ka wehewehe pōkole:

Huahana Huahana

Hoʻolauna

Kākoʻo ka P18-L2 Bus Validator i nā kāleka akamai a pau e pili ana i ka ISO14443 Type A & B, Mifare Classic, DESFire, FeliCa, i kūkulu ʻia i loko o ke kaʻina hana 32bit ARM Cortex-A9.Aia nā kumu SAM 4 no ka mālama ʻana i nā SAM Kūʻai e hōʻoia i ka palekana a me ka pololei o nā hana.
Me nā mea heluhelu kāleka akamai i hoʻohui ʻia, LCD kiʻi, nā leo a me nā hōʻailona LED, kūpono loa ka P18 Bus Validator no nā ʻano like ʻole o nā ʻōnaehana hōʻiliʻili ʻokoʻa, e laʻa no nā kaʻa kaʻa, trams a me nā ala kaʻa ʻē aʻe.Me nā hiʻohiʻona GPS, hiki i ka P18 iā ʻoe ke ʻimi i ke kaʻa a hoʻonohonoho maʻalahi i ka holo me ka pili ʻana i ka mamao.
Me ka barcode scanner i kūkulu ʻia, hiki i ka P18 ke kākoʻo i nā ʻano uku uku ʻole.Ma waho aʻe, hiki i ka P18 ke kākoʻo i ka uku kāleka kāleka e ka palapala EMV.

Nā hiʻohiʻona

32-bit ARM Cortex-A7 528 MHz
512 MB DDR
8 GB EMMC
Kuwaho 64 MB SPI Flash
8KB FRAM
Linux OS
160x80 dot matrix LCD hōʻike me ke kukui hope
4.3 iniha
4 Nā Hōʻike Kūlana LED
2 kī hana
Kākoʻo mana hoʻololi
Buzzer i kūkulu ʻia
Leo leo paʻa i loko
Hoʻokaʻaʻike kāleka akamai ʻole
ISO 14443-Hoʻokō, Type A & B maʻamau, ʻāpana 1 a 4, T=CL protocol
MiFare
Maikaʻi, MiFare Ultralight C, MiFare EV 1, MiFare DESFire

FeliCa, kūpono ISO 18092

4 x ISO7816 SAM Sockets
Kākoʻo RS232 Interface
Kākoʻo iā RS485 / Ethernet / USB Interface
Hiki ke hoʻonui i ka firmware
Uaka manawa maoli (RTC)
Hoʻopili uila

Ke kelepona paʻalima
GSM/GPRS 900/1800 MHz
WCDMA 900/2100MHz
TD-SCDMA
FDD-LTE (Bāna 1/3)
TDD-LTE (B38/39/40/41)
Hoʻokahi puka SIM me ka nui o ID-000

WiFi
Bluetooth
Kākoʻo GPS
Nā palapala hōʻoia

CE / FCC / RoHS / Pili ʻole EMV Papa 1 / IP54

P18-L2 Bus Card validator USB bus rfid smart card reader (6)

Nā noi maʻamau

Nā Kūlana Kino
Anana	227mm (L) x 140mm (W) x 35mm (H)
Waihona hihia	ʻeleʻele
Kaumaha	880g
Mea hana
32-bit ARM Cortex-A7 1 GHz
Pūnaehana hana
Linux	3.0.35
Hoʻomanaʻo
DDR (RAM)	512 MB
EMMC (Flash)	8 GB
SPI Flash	64 MB
FRAM	8 KB
Ka mana
Voltage Hoolako	8 – 47 V DC
Hāʻawi i kēia manawa	Max.2A
Pale Voltage	Kākoʻo ʻia
Ma luna o ka pale o kēia manawa	Kākoʻo ʻia
Hoʻohui
RS232	3 laina RxD, TxD a me GND me ka mana kahe ʻole
RS485	3 laina A, B a me GND
Ethernet	ʻO 10/100-base-T i kūkulu ʻia me ka mea hoʻohui RJ45
USB	USB 2.0 Host Piha Mama
GSM/GPRS/EDGE	900 MHz/1800 MHz
UMTS/HSDPA/HSPA+ pālua	B1/B8
Pānaʻi Kaulua TD-SCDMA	B34/B39
ʻEhā-Band FDD-LTE	B1/B3/B7/B8
ʻEhā-Ban TDD-LTE	B38/B39/B40/B41
WiFi	IEEE 802.11 b/g/n
GPS	Kākoʻo ʻia
Bluetooth (Koho)	Bluetooth 4.0 Dual mode, me BR, EDR a me LE
Kākoʻo Barcode Scanner
Kākoʻo ʻia ʻo Barcode Scanning	1D / 2D / QR Code
Pilikino Kāleka akamai ʻole pili
Kūlana	ISO-14443 A & B māhele 1-4, ISO-18092
Kūkākūkā	Mifare® Classic Protocols, T=CL, FeliCa
Heluhelu/Kākau Kāleka akamai	A hiki i 424 kbps
Ka mamao hana	A hiki i 50 mm
Ka pinepine hana	13.56 MHz
SAM Kāleka Interface
Ka helu o nā Slots	4 ID-000 kau
ʻAno Hoʻohui Kāleka	Hoʻopili
Kūlana	ISO/IEC 7816 Papa A, B (5V, 3V)
Kūkākūkā	T=0 a i ole T=1
Heluhelu/Kākau Kāleka akamai	9,600-115,200 bps
ʻAno hoʻonui paʻa paʻa
Hiki ke hoʻonui ʻia ka firmware ma o	RS232
Nā Peripherals i kūkulu ʻia
Hōʻike LCD	160×80 dot-matrix LCD hōʻike me ke kukui hope, 4.3 iniha
ʻŌlelo/Buzzer	Kākoʻo ʻia
Nā Hōʻike Kūlana LED	4 mau LED no ka hōʻike ʻana i ke kūlana (mai ka hapa hema: uliuli, melemele, ʻōmaʻomaʻo, ʻulaʻula)
Nā kūlana
Mahana	-20°C – 65°C
Ka haʻahaʻa	5% i ka 93%, non-condensing
Nā palapala hōʻoia/ka hoʻokō
ISO-7816, ISO-14443, qPBOC L1, qPBOC L2, CE, FCC, RoHS, Pili EMV Papa 1, IP54